MPA161 MELTING POINT APPARATUS
• Fast, safe, reliable measurements
• Mercury free
• Built-in digital thermometer
• Microprocessor controlled ramps
• Ramp rates from 0.5 to 20 °C/min
• Easy to clean and maintain
• Tube tapper packs samples
• NRTL safety certified
Display
Type | 4 digit LED |
Readout | Start, stop or ramp rate, oven temperature, and stored measurement data |
Temperature | |
Resolution | 0.1 °C |
Accuracy | ±(0.45+0.0045T) where T is temperature in Centigrade Typical: ±0.6 °C (<200 °C), ±1.0 °C (≥200 °C) |
Reproducibility | 0.2 °C |
Oven | |
Range | 50 °C to 260 °C |
Ramp rate | 0.5, 1.0, 2.0, 5.0, 10, 20 °C per minute |
Heat-up time (typ.) | 2.5 minutes to 100 °C, 6.5 minutes to 250 °C |
Thermometer | Built in Pt RTD |
Temperature control | Closed-loop PID |
Safety shut off | Automatic after 30 minutes idle |
Capillaries | |
Dimensions | 1.4 mm to 1.8 mm outside dia., 100 mm length |
Capacity | Up to 3 tubes |
Fill height | 2 mm to 3 mm |
Sample packing | Automatic (tube tapper) |
General | |
Power | |
MPA161 | 200 to 250 VAC, 50 to 60 Hz, 1/2 A, 75 W nominal |
Environment | 0 °C to 30 °C, non-condensing |
Humidity | <90% |
Weight | 2 lbs. |
Dimensions | 6.5"× 9.5"× 5.25" (WHD) |